![]() |
PrinterUtility_EN
1.1.18
|
The division mainly contains the following functions:
Precautions:
Before operation, make sure that the port parameters are set correctly and connected to the printer, otherwise the operation is prohibited. Please refer to the "\ref page_1_PortSet" page for port settings.
Step 1: Go to the printer settings page and select the item you want to set.
Step 2: Set and save the printer settings 1)Click each drop-down box to select the print settings you want to make. Different printers support different print settings: BTP-R990, BTP-R880NP, BTP-M300 only support setting paper type and density; BT-T080 supports print settings not supported. The BK-T680 supports setting the paper type, density, presenter mode, and presenter wait time. 2)Click the "+" button in the lower left corner to enter the user-defined printer setting interface. The interface is divided into three columns: setting item, instruction and deletion. Click the plus icon to add the customization, double-click the blank to enter the name of the customization printer setting item to be set, and then click the plus icon in the next line to add a new line to set the option name and corresponding instructions. If you want to delete an item, just click the minus sign Icon in the third column. After setting, click the Save button in the lower right corner, and the customized settings will be loaded into the printer setting interface. 3)Click the settings button in the lower right corner to save the current print settings.
USB mode switch
Query firmware version number
1)After entering the usb configuration network interface, the parameter information of the current network board is read from the printer, and the first page is Ad-Hoc mode setting relevant item, the second page is the infrastructure mode setting item.
4)The function is valid only in usb communication, and other communication will remind the function not support.
1)Clicking the network configuration button will launch the BYNetConfig configuration tool, which mainly searches and configures network interface devices within the local area network through the UDP broadcast protocol. It supports multiple network card searches, and specific functions can be found in the tool's help document.
Precautions: